Many St. Peter car owners have probably wondered: “What’s the harm in putting off replacing an engine air filter? The answer is that not replacing it could cause your Mass Air Flow (MAF) sensor to fail. This expensive sensor is situated between your engine air filter and your engine. Dirty air filters are a leading cause of mass air flow sensor failure – and these babies can cost several hundred dollars to replace in St. Peter.

Change your vehicle air filter at Autotronics of St. Peter when it’s dirty. Your vehicle engine will thank you.

Give us a call.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

If you’ve ever heard a squealing sound under your vehicle hood, chances are it was your serpentine belt. More importantly, the belt powers the alternator. The alternator creates electricity that’s used by your vehicle’s electrical systems and also charges the battery. Without the alternator, the battery will go dead after a short distance.

The serpentine belt may also run the pumps for both the power steering (some are electric) and power brakes (some use vacuum boost).

And, on most vehicles, the serpentine belt powers the water pump. The water pump circulates coolant through the engine to keep it within optimal operating temperatures. On some St. Peter vehicles, the water pump is powered by the timing belt instead of the serpentine belt.

When they understand what it does, St. Peter drivers realize that if it breaks, it affects a lot of systems. That’s why vehicle manufacturers outline recommended replacement guidelines in the owner’s manuals. If this important maintenance component is not included in your owner’s manual, come see us at Autotronics of St. Peter.

At Autotronics of St. Peter in St. Peter, your professional technician can perform a visual inspection of the belt to see if it has any cracks that signal the belt could fail soon. If the belt has more than three or four cracks every inch or couple of centimeters, has deep cracks that penetrate half the depth of the belt, is frayed, is missing pieces or has a shiny, glazed look, it needs to be replaced regardless of age or mileage.

If it has lost a significant amount of thickness, it also needs to be replaced. Talk to your service advisor at Autotronics of St. Peter. There’s a special spring-loaded pulley attached to the engine called the tensioner pulley. Its job is to make sure there’s a constant tension on the serpentine belt so that it doesn’t slip. The spring can become worn and no longer provide the necessary pressure to keep the belt tight. At Autotronics of St. Peter, we recommend that the tensioner be replaced at the same time as the serpentine belt.

As mentioned, a squealing sound could alert you that the serpentine belt needs to be replaced. It may be loose if you hear a slow, slapping sound when idling your vehicle.

All in all, the serpentine belt is very important to the operation of your vehicle. And it’s not that expensive to replace at Autotronics of St. Peter – so it’s good to do so before it fails.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

Many St. Peter drivers want to accessorize their vehicle – you know, make it theirs. One of the easiest ways to get a custom look is to get some new wheels. There are thousands of wheel designs at St. Peter area tire shops to get you the look you want. And for many St. Peter drivers, that look includes bigger wheels. It used to be that cars came from the factory with 15 or 16 inch wheels. Now 16, 17 and even 18 inchers are standard. And the factories are offering optional wheel packages up to 20 inches or more.

So let’s talk about what to consider when you want to upsize your wheels. It’s not exactly a DIY project, so you need to know a thing or two before you get started. The most important term to know is rolling diameter. The rolling diameter is simply the overall height of your tire. Unless you want to modify your vehicle suspension, you’ll want to keep your rolling diameter the same when you upsize your wheels.

Let’s think about those three golden doughnuts in front of you. They’re all about the same size. So if we pretend they’re tires, they would have the same rolling diameter. The doughnut hole is the size of the wheel. Now pretend we’ve made the hole bigger on some. That’s like having a bigger wheel – but the rolling diameter is the same.

It’s important to keep the rolling diameter the same for several reasons. First of all, if the tire is bigger, it might not fit in the vehicle wheel well. Next the speedometer, odometer and anti-lock brake system are all calibrated for the factory rolling diameter. In order for your anti-lock brakes to work properly, the rolling diameter must stay within 3% of the factory recommendation. If you ignore that, you run the risk that your anti-lock brakes won’t work properly.

Some have vehicles with electronically-controlled suspension that will be negatively affected by changing the rolling diameter. Let’s think about the doughnuts again. You see, as the size of the wheel gets bigger, the sidewall gets shorter. The tire holds less air, so the sidewalls are made stiffer to compensate.

Low profile tires from top manufacturers use special compounds that give the sidewall the strength it needs without compromising ride quality. As you increase your wheel size, you’ll typically get a slightly wider tire. This means that you have a larger contact patch. The contact patch is part of the tire that contacts the road. Because there’s more rubber on the road, the vehicle will handle better. And braking distances will be shorter. A lot of St. Peter folks with trucks or SUVs love the extra control.

MN drivers need to watch out that the contact patch isn’t so big that the tires rub in turns or over bumps. What we’re talking about here is fitment. Your tire professional at Autotronics of St. Peter can help you get this right. He’ll install your new wheels, add spacers if needed to make sure your brakes fit inside your new wheels and get you rolling.

Also, if you drive off-road in MN a lot, you may need a higher profile tire to protect your new rims. And make sure your new tires have the load rating you need if you tow a trailer or haul heavy loads. Again, your tire professional at Autotronics of St. Peter knows how to help.

And don’t forget about tire pressure. If you have larger rims, your new tires will hold less air and they’ll need to run a slightly higher pressure. Forget that and you’ll wear your tires out fast. Finally, get an alignment at Autotronics of St. Peter after you get your new shoes. 

Stop by Autotronics of St. Peter to learn more about how you might upsize your wheels or tires.

You’ll find us at:

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com