Part of the engineering that goes into designing a vehicle is testing the components to ensure that they meet durability and safety standards. Because of this, manufacturers have a good idea as to how long the parts in your vehicle will last under normal driving conditions. For this reason, they give us guidelines to follow regarding how often to inspect the various parts and systems on our vehicles.

Vehicular components are required to meet certain standards. The government mandates some of these standards. Others are set by the auto industry. Recommended car maintenance schedules are designed to help St. Peter vehicle owners maintain these standards. Disregarding routine maintenance or procrastinating preventive maintenance will result in lowered performance and reduced safety for a vehicle.

Maintenance schedules are designed to ensure three areas of automotive performance for St. Peter drivers: protection of the vehicle itself, efficiency and safety.

Protection

Your vehicle’s components need protection from dirt, road damage, rust, corrosion and fuel and combustion by-products. Protective components include filters and fluids.

Most of the fluids in your vehicle are there to keep the vehicle running smoothly and to protect the vehicle from corrosion, damage or harmful contaminants. These fluids need to be changed regularly in order to continue protecting your vehicle.

For example, motor oil lubricates your engine; that keeps it running well, but it also contains detergents and other additives that clean your engine and protect it from corrosion. Your vehicle’s engine was engineered for best performance with a specific weight and type of motor oil. St. Peter drivers should always be careful to use the right motor oil for their engine.

Over time, the  additives in motor oil are depleted, and the oil becomes contaminated by dirt, water and waste gases from combustion. So in order to keep your engine clean and to continue to protect it from corrosion, the oil has to be changed periodically.

Efficiency

Over time, your vehicle’s systems will get dirty and parts will wear down. Cleaning dirty systems and replacing worn parts will improve the efficiency of your vehicle, which is usually measured in terms of and power output.

For example, your fuel system components gradually get clogged up with gum and varnish from gasoline. This restricts fuel flow, which lowers your engine’s efficiency. Gas mileage drops as a result. Cleaning your fuel system will restore and improve gas mileage.

Safety

Some of your vehicle’s systems must be maintained for safety reasons. Your brakes are a prime example of this. Brake pads and brake fluid need to be replaced in order to ensure good braking power. Poorly maintained brakes lead to accidents.

Your owner’s manual is your first resource when it comes to knowing when and how to maintain your vehicle. Of course, you can consult with your Autotronics of St. Peter service advisor. He can give you good auto advice on how to adjust your service schedule to account for climate, local road conditions and your driving distances.

Beyond routine maintenance, your vehicle also requires regular inspections. These inspections are usually recommended at specific mileage intervals, like 15,000 or 20.000 miles (24,000 km or 32,000 km). The interval is based on the known life expectancy for particular components in your vehicle. Regular inspections will identify vehicular components that need to be repaired or replaced before damage is done to the vehicle or safety is compromised. They are also designed to safeguard the efficiency and performance of your vehicle.

The multi-point inspection that comes with a full-service oil change does not cover all of the regular inspections your vehicle needs for peak performance and safety. Check with the automotive professionals at Autotronics of St. Peter in St. Peter to find out what additional inspections your vehicle needs and how often. Good car care requires regular and consistent maintenance. But good maintenance pays for itself in better and fewer repairs. It may even save your life.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

The current vehicles in the market have over a century of engineering behind them. They have evolved into complex and powerful machines. Developments in their engines, however, have coincided with advances in many other vehicle components, including the fluids.

It’s up to people in St. Peter to always use the right type of fluid for their vehicle. Your service advisor and your owner’s manual are resources for auto advice on exactly what types of fluid your vehicle needs. Improper fluids can damage your vehicle and void your warranty.

Some of the fluids that have changed significantly in recent years are cooling system fluid, brake fluid, transmission fluid and motor oil. Each of these comes in many varieties now, and it’s hard to know exactly which one your vehicle needs.

Cooling systems were once made of iron, steel and rubber. One coolant could be used to protect all of these materials. But new cooling systems have components made from a variety of metal alloys and several kinds of plastic, and coolants now contain additives that protect these various materials from corrosion. Since the materials vary among manufacturers, they require different additives, which means there are now several coolants on the market. The type of coolant your vehicle needs depends on the materials used in its cooling system.

Most vehicles used to require DOT 3 brake fluid. But now many vehicles need DOT 4 or DOT 5. Some St. Peter drivers mistakenly think the higher numbers reflect an increase in grade—that DOT 4 is somehow better than DOT 3. But the truth is, the numbers represent variations in formulation. The different formulas have evolved to meet the demands of newer and better brake systems. For a long time, transmission fluid came in two varieties: regular and friction-modified. But transmissions have come a long way recently and so have the fluids that protect and lubricate them. There are several new types of fluid on the market, but your vehicle is designed for just one of them.

Of all the automotive fluids, motor oils have experienced perhaps the greatest advances in engineering and technology. A number of new weights and formulations have recently been developed to meet the needs of modern engines, which have more parts and tighter tolerances than ever before. Engines have become more sophisticated and complicated, but they have also increased in power and fuel efficiency. Despite these changes, St. Peter vehicles still need them to be highly durable.

That’s the job of motor oil. Motor oil still has to perform its original function—lubricating and protecting the engine. It is formulated to help clean the engine as well. Modern motor oil also has to be thin enough to penetrate small engine passages yet still be resistant to vaporization.

Specialized motor oils have also been developed for high-mileage vehicles. If your vehicle has 75,000 miles/120,000 km or more on it, you might consider switching to one of these motor oils. They contain extra detergents that help clean older engines, additives that condition seals and gaskets that can become brittle with age. High-mileage motor oils come in weights and types just like regular motor oils, and St. Peter drivers should match the proper weight and type of high-mileage oil to their vehicle in the same way you would regular motor oil.

Over time, vehicles have developed in complexity and variety, and their fluids have developed as well. Each vehicle is matched to a set of fluids that meet its specific requirements. MN vehicle owners should take care to learn their vehicle’s fluid requirements before topping off at home. A large part of preventive maintenance for St. Peter drivers is making sure your vehicle’s fluids are clean and adequate, but they must be the proper type as well. As our vehicles become more sophisticated, car care becomes more sophisticated as well.

Learning about proper fluids for your vehicle will help you maintain its performance and prolong its life. Talk to us at Autotronics of St. Peter in St. Peter.

 Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

Something you’re going to be hearing a lot about around St. Peter, MN, is diesel engines. We’re not talking about semi-trucks and buses; we’re talking about diesel engine cars, pick-ups and SUVs.

Most people in MN are surprised to learn that around half the cars on the road in Europe have diesel engines. Nearly all import brands offer a range of diesel engines abroad – even the ultra-luxury brands like Mercedes and BMW. For the most part, these diesel engines haven’t been available in St. Peter, MN. But that’s about to change.

In the past, North American diesel fuel has had a much higher sulfur content than European fuel. Recent environmental laws have required changes in diesel formulation and emissions standards here in St. Peter, MN, so we are now ready to start seeing more diesel options offered over the next few years.

Why are so many St. Peter drivers interested in diesel engines? Well first off, diesel fuel is more energy dense. There’s more power in a barrel of diesel fuel than there is in a barrel of gasoline. The result? Better performance and improved fuel economy.

Diesel powered vehicles get about 20 percent better fuel economy. And as for power – why do you think that the majority of new heavy duty pick-up trucks are being sold in St. Peter with diesel engines?

If you think back to the late 1970’s and early 1980’s, you may shudder when you think of the diesel powered cars of the day – noisy, smoky, under-powered beasts that rattled and shook their passengers. Modern diesels sold in MN have evolved considerably.

They are quiet, clean – and powerful. They’re so refined that many St. Peter drivers can’t even tell they’re riding in a diesel powered vehicle. In addition to fuel savings, diesels generally last longer than gasoline engines because of their heavy duty construction.

Another thing the St. Peter green crowd takes advantage of is the use of bio-diesel in diesel vehicles. Bio-diesel is made from vegetable oil – even recycled cooking oil from St. Peter restaurants. There is a lot of buzz about hybrid cars in MN. Look to diesel-electric hybrids in years to come to make a good idea even better.

Every year, manufacturers introduce new diesel models. Look for diesels in domestic light trucks, SUVs and passenger cars. Import brands have plans to bring more of their outstanding diesel engines to MN as well.

New St. Peter diesel owners need to know that properly maintaining a diesel engine is somewhat different than a gasoline engine. Fluid change intervals are different. Emissions control devices have to work harder to filter diesel fuel and to scrub the exhaust so you will need to pay attention to that. And the fuel injection system operates at much higher pressures than gas fuel injection systems, so it’s important to keep your fuel system clean with a diesel.

The good news is that Autotronics of St. Peter in St. Peter is keeping up with the new diesel technology and will be able to advise you on maintaining your diesel.

When we tell you to look for more diesels on St. Peter streets, you won’t be looking for smoky tail pipes as a clue. You also won’t be listening for that familiar big rig rattle. And, you certainly won’t be waiting for them at the stoplight, because modern diesels are as quick as their gasoline counterparts.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com