If you’ve ever noticed your vehicle’s lights are dim or not working at all, the problem could be many things.  But one possibility is your battery cables aren’t doing their job.  A power outage in your vehicle is similar to one in your house and needs to be repaired to get things back to normal.

Battery cables connect your vehicle’s battery to the vehicle itself.  There is a positive cable when provides the power and a negative cable that connects to the vehicle chassis and provides a ground for electrical components. 

A failing battery cable may cause your vehicle not to start.  Your starter may turn over very slowly.  Or you may just hear a series of clicks.  One other clue is on your dash—the battery warning light. 

There are many things that can cause power issues in a vehicle, but it’s important to keep battery cables clean and maintained.  Salt and corrosion are enemies to any power system.  A technician can keep things in top shape, disconnecting the cables, inspecting them and cleaning their ends and the battery terminals.  Cables, by the way, are often made up of smaller strands of wire.  If they are frayed, some of those smaller wires can touch metal parts of the vehicles that they shouldn’t.  The result? Electrical system malfunctions.

So if you see any of these signs that something is not quite right with the power in your vehicle, consult your service advisor and get it checked out.  Feel the power!

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

Can you think of anyone who likes getting a flat tire?  Of course not.  But when one of your tires winds up with a flat or leak, whether it be from things like hitting a curb, running over a nail or picking up a sharp stone, it’s time to have someone who knows what they’re doing take care of it.

If you’re thinking you’d like to avoid having to buy a new tire, you wonder if a patch or plug will suffice.  It depends where the puncture is and how big the hole is.  Most tire experts will say if the hole in the tire is less than ¼ of an inch or 6 mm, a patch can work.  But a patch likely won’t work if the compromised part of the tire is on its shoulder or sidewall.

Here’s why.  The shoulder of a tire is the part between the sidewall and tread and it’s usually rounded.  It’s under a lot of pressure, more than even the sidewalls. And because of that curved shape, it’s hard to get a patch or plug to hold.

The sidewall is the side of the tire.  Sidewalls flex a lot when you drive, and the strain can cause a patch or plug to loosen up.  A weak spot in a sidewall is much more likely to fail and cause a blowout.  So if you have damage in the sidewall or shoulder, that tire is a good candidate for replacement, not repair.

If you have a cut or gash in your tire, it’s possible the cords that strengthen your tire have also been cut.  That weak spot can spell trouble, and this type of damage usually means you should get a new one.

Your service advisor can tell you what the appropriate action is to take when you have tire damage.  You may be able to get good results with a patch, or you may have to replace one or more tires.  Your safety is riding on them.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

This may have happened to you.  You drive somewhere and get out of your vehicle only to try closing the door and it just won’t stay closed!  What a helpless feeling.  You can’t lock it; you can’t leave it like it is. Or, let’s say you head down to your vehicle to head out to work in the morning and you can’t open the door.  What are you going to do now?

Vehicle doors take a lot of abuse.  They are opened and closed hundreds of times and we expect them to just keep working perfectly all the time.  They do require a bit of tender loving care.  Let’s take a look at two different scenarios of stuck doors.

First: the door that won’t close.  It’s a security issue.  It’s also a safety issue.  You can’t really safely drive a vehicle with a door that won’t close. What if you or a passenger is tossed out?  Sure, some people try to tie a stuck-open door closed or bungee it, but that’s dangerous.  It’s best to get that vehicle to the service repair facility as soon as you can, and having it towed is the safest way. 

Second: the door that won’t open.  There are many reasons this can happen.  Freezing weather is one, a misaligned door is another.  There could be electrical issues.  Corrosion could have broken a part inside the door.  The possibilities, unfortunately, are numerous.

If you can’t get into your vehicle’s driver’s door, with any luck another door might open and you can climb into the driver’s seat and head on to the repair facility.  A lot of people may be tempted to try to fix a stuck door themselves, but many wind up causing more damage to the door and have to have a trained technician step in to repair the mess.

One way to minimize the possibility of having a door stick open or closed is to make sure it gets regular maintenance.  Door locks, hinges and latches should be lubricated at certain intervals.  Locks should be kept clean.  While many vehicles now have electronic locks, sometimes an electrical failure in the vehicle or key fob can inadvertently lock you out.  Nearly every vehicle has a mechanical key in case that happens; if you don’t know how that works, have your service advisor show you how. 

Also, you technician can make sure your doors are properly aligned and aren’t sagging. All of these things can help you keep your doors opening and closing the way they were designed to. Your next trip may “hinge” on your doors being in top condition.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com