Your vehicle has a way of letting you know when something’s wrong. Consider a vibrating steering wheel. It certainly didn’t do that when it was new, so that shake is trying to tell you something.

There are a few things that can cause your steering wheel to vibrate as you drive down the road.  One of the most common is out-of-balance tires.  You may not only feel that wobble in your steering wheel, you might also feel it in the tires.  Sometimes it’s not there when you’re driving at lower speeds through residential areas, and sometimes it starts when you hit highway speeds. 

So what is tire balance anyway?  Well, you have a rubber tire that fits around a metal wheel.  It should have the same weight all the way around.  If it doesn’t, it will start getting the shakes.  Ever load your washing machine so that all the clothes are at one side of that drum that spins?  When it hits the spin cycle, it can throw that washer against the wall. 

That’s the same thing that’s happening with an out-of-balance tire/wheel combination.  A technician has special equipment to figure out where to put small weights on the wheel to get things back in balance again.  But it could be that you hit a pothole some time ago and bent the rim.  Or your tire isn’t as round and even as it once was.  That could be due to age, damage or wear and tear. The technician will know and offer you options.

Another possibility for that vibrating wheel is a faulty brake, such as warped rotors or a sticky caliper.  All of these issues can be evaluated as part of regular, routine maintenance with us.  There are many things that cause vibrations in your wheels.  But you don’t want any bad vibes when it comes to your vehicle. 

At one time or another, most drivers honk their horn at someone who might be texting at a stoplight or not paying attention when they’re driving.  But what happens when you tap on your horn and all of a sudden it won’t quit? Everyone’s looking at you like you’re an angry jerk and all you want to do is turn it off!

It helps to know the basics of what’s happening when you honk your horn.  There’s a switch in the steering wheel, of course, and when you press on it, it sends power to a relay which then energizes the horn.  Bingo.  Sound.  When the horn sticks on, one of these parts or the wiring has developed a problem. 

With the ear-splitting noise inside your cabin, it may be hard to keep your cool, but do your best to stay calm.  Try pushing the horn several times; it may un-stick the switch if you’re lucky.  If not, there are a couple of things you can try.

First, if you can, pull your vehicle off the road and into a spot where you’re not disrupting traffic.  If you feel comfortable rummaging around in your vehicle’s fuse box, you might be able to pull the fuse that manages the circuit for your horn system.  A hint: the fuse boxes sometimes have a label inside showing which fuse goes to which part of the vehicle. Find the fuse that goes to the horn and pull it out (sometimes there’s a fuse-pulling tool inside the fuse box).

But many people don’t feel like tackling that.  Yes, you can drive over to a service facility with the horn blaring (not the best idea).  Or call your service facility and see if they might be able to send someone over to where you are so they can shut off the horn.

At the shop, a technician can check wiring, switches, relays and other components to find out what’s wrong.  This is something that should be left to a professional for a couple of reasons.  First, repairs around the steering wheel can involve airbags.  Second, some horn components may be part of a vehicle’s alarm system. 

The bad news is that your horn may not give you any warning before it starts blaring uncontrollably.  But the good news is that a horn doesn’t malfunction all that often, and now you have a plan if it does.    

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

If every road was straight and smooth, we wouldn’t have to worry much about wheel alignment. But they’re not, so we do.  Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you’ll notice it in one of several ways.

Your steering wheel may not be centered when you’re driving straight ahead, or your vehicle may pull to one side.  You may find your tires wearing on one side or they may squeal.  All are signs that could point to you needing an alignment.

Your wheels should be perpendicular to the road and parallel with each other.  If not, your tires will wear out faster and your vehicle won’t go straight on a level straightaway.

In alignment, there are several factors that must be checked.  One is camber.  Your wheels should be straight up and down if you look at them from the front. If not, you’ll wear your tires unevenly on one side.

Another factor is caster, the angle of the steering pivot.  Most vehicles have what’s called positive caster, when the top of the steering pivot leans toward the rear.  Proper caster balances steering effort, stability on the highway and cornering.

You may have heard the term “toe” in reference to your wheels.  If you looked at your front wheels from straight above, for example, imagine your wheels were your feet.  If you were to turn your toes in toward each other, that would be toeing in.  The toe of your vehicle should be set to manufacturer’s specifications so your vehicle handles well and doesn’t prematurely wear out tires.

It’s a good idea to have your alignment checked periodically since it can get knocked out by one hard knock or a lot of little knocks.  It’s not just about tire wear, it’s about ride comfort and safe handling. You may say a vehicle aligned just feels divine.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com