It’s bad enough when you mistakenly leave a window open in your vehicle on a rainy day and you find your carpet soaked.  But what in the world is going on when your windows are closed tight, not leaking and you STILL wind up with wet carpet? The answer could be something you might not even know your vehicle has.

And the answer is? Drains. And those drains can get clogged.  Yes, your vehicle has several drains with tubes or hoses attached to them that you really never see.  There are some in and around the hood that channel rainwater down to the ground.  There are some that take condensation from the air conditioner and allow it to flow outside.  And if your vehicle has a retractable sunroof or moon roof, there are small drains at each corner that connect to tubes that go through the vehicle body down to an exit near the ground. 

Considering all the leaves, dirt, dust and other debris your vehicle encounters on a daily basis, it’s not surprising that these drains can get blocked.  Then when it rains, that water winds up going to the place of least resistance.  Sometimes, that’s inside the cabin where it shows up as wet carpeting.

So, what’s the solution?  You may be tempted to see if you can clean out those drains yourself.  But there are many people who have tried blowing condensed air in the drains only to find that they literally blow the tubes off of their connections inside the vehicle’s body.  Reattaching those can be a time-consuming, labor-intensive, expensive proposition.

A trained technician has the equipment and knowledge to clear out those drains properly. To prevent clogged drains, regular maintenance is the key, so when your vehicle is in for other periodic maintenance like oil changes and tire rotations, the technician can make sure all drains are clear and flowing like they should.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

When automakers first came out with cruise control, it was a real luxury item.  The older cruise controls used a mechanical vacuum system but it worked.  Well, some of the time. 

Now days, cruise control is all electronic, thanks to computers.  It’s reliable and a real convenience on long trips.  Cruise control is offered on most vehicles and standard on a lot of them.  Because it’s electronic, when it breaks, it’s usually some electronic component.  Your vehicle’s cruise can be the victim of a blown fuse. Or your vehicle’s speed sensor, which—not surprisingly—measures your vehicle’s speed, can also stop working.  And that will cause your cruise to stop cruising. 

Vehicles with cruise control also have a built-in feature that, when the brakes are applied, turns off the cruise.  With electronic cruise control, that happens thanks to the brake pedal switch, and if a problem develops in that switch, the cruise might not work.

The newest cruise control is called “adaptive.” What that means is that it will maintain your vehicle’s speed as well as the distance between you and the vehicle ahead of you.  That means if a car ahead of you slows down, your vehicle will slow down to the same speed and even stop if the car ahead stops.  Pretty cool, right? As you can imagine, adaptive cruise control is more sophisticated and has many more components than standard cruise.  The systems vary from manufacturer to manufacturer, but they use on-board radar units and cameras to calculate what your vehicle should do to maintain a safe distance and speed. 

Finally, there are still some of the older style cruise controls out on the roads.  They’ll stop working when the vacuum actuator develops a problem, a vacuum hose starts leaking or breaks or the cable between the actuator and the throttle kinks, breaks, seizes up or becomes detached. 

If your cruise control isn’t working, your service repair facility will be able to determine what kind your vehicle has and what it will take to fix it.  Good news for the cruise blues.