Anyone who drives a car in St. Peter knows that engines get hot when they run. But did you know that engines need to be cooled to keep running? Heat inside an engine can cause the metal parts to expand, which can seize up an engine and make it stop running. It can even ruin the entire engine! Good vehicle care requires keeping its cooling system in good condition.

A vehicle’s cooling system circulates water and antifreeze (coolant) through the engine where it absorbs heat. It then flows to the radiator where the water and antifreeze are cooled by the air that flows over the radiator. Then it circulates back into the vehicle’s engine to absorb more heat.

Why shouldn’t St. Peter auto owners just use water? Because water boils at temperatures that are often reached inside of an engine. Steam won’t cool your vehicle engine and is hard to contain within the cooling system. The antifreeze keeps the water from boiling.

So why do we call it antifreeze? Shouldn’t it be antiboil? Truth is, the antifreeze performs another critical task. Water freezes in cold MN weather. That would spell disaster for your vehicle’s engine. So antifreeze also keeps the water in your cooling system from freezing in all but the most extreme cold. Pretty neat stuff!

Taking care of your cooling system is part of good preventive maintenance for your vehicle. St. Peter area drivers should check coolant level often and regularly inspect your cooling system for leaks.

That is just good auto advice. Your vehicle’s manufacturer has maintenance requirements for draining and replacing engine coolant. Consult your owner’s manual or ask your friendly and knowledgeable Autotronics of St. Peter service advisor for these recommendations, as they vary widely among vehicles.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

It’s happened to all of us.  We’re driving down a highway at night and over a crest appears a car with its high beams blazing.  You are momentarily blinded, hoping the other driver will switch them to their low beam setting and restore your vision.

Not only do we not appreciate being blinded, face it; we don’t want to be that other driver, either.  You know, the one who forgets to turn down their high beams.

Why do we want high beams in the first place? They can improve safety when used correctly, giving drivers more reaction time since they can see farther down the road.  But research has found many drivers either don’t use them or, when they do, they frequently forget to switch to low beams.  Enter the automatic high-beam dimmer.

The quest for the perfect one began back in the 1950s, General Motors invented something it called the “Autronic Eye.” It was a phototube which sat on the dashboard and turned down your beams when it saw other headlights.  While touted as being the biggest advance in night driving safety in 30 years, it didn’t work all that well.  But as technology got more advanced, systems improved.

Today’s automatic high beam dimmers usually have a camera in the rear view mirror (pointing forward).  When the camera sees lights, software in the system’s computer attempts to determine the source of the light, whether it is an oncoming vehicle, taillights, ambient city lights, street lights or the reflection off of a street sign.  It then adjusts the headlights to operate high beams if appropriate or a less-blinding mode if they’re not.

Some automakers are striving to make their headlight systems smarter and safer by developing lamps that can avoid blinding oncoming drivers by means other than simply dimming them. One idea? Splitting the beams so they will block just the portion that shines into the eyes of oncoming drivers.

It’s a long way from the Autronic Eye. 

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

Hello St. Peter – let’s talk differentials. If you have a rear-wheel drive vehicle, your differential is on the back axle. With front-wheel drive cars, the differential is up front. All-wheel drive and 4-wheel drive vehicles have three differentials – front, rear and in the middle. So you see, you’ve got a differential (or two or three) and it needs service now and then.

What does your vehicle differential do? Well, it compensates for the differences in speed between your outer and inner wheels in a turn. Using the dimensions of a typical car, let’s compare the distance the wheels travel from the start of a turn through to the completion of the turn.

The inside wheel travels about 12.6 feet/3.8 meters. How much farther does the outside wheel travel? About 18.8 feet/5.7 meters – over 6 feet/1.9 meters more. This means the outer tire has to rotate 9 times in the same amount of time that the inner tire has to rotate only 6 times – so the outer tire has to spin faster in order to keep up. The differential makes this possible.

The gears in the differential are cooled and lubricated by differential fluid. It’s this fluid that needs to be serviced. Small bits of the gears break off and are suspended in the differential fluid. The dirtier the fluid, the faster the gears wear.

So your Autotronics of St. Peter technician drains the old fluid out and replaces it with fresh fluid. Some differentials also need a special additive that is put in at this time.

So when should you have your vehicle differential serviced? Intervals vary from vehicle to vehicle – and may be as short as 15,000 miles/24,000 km – so check your vehicle owner’s manual or ask us at Autotronics of St. Peter. If you frequently drive with heavy loads, tow a trailer or drive in hot MN conditions, you may need to change differential fluid more often. Servicing your differential on schedule at Autotronics of St. Peter can save a pricey replacement down the road.

Give us a call.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com