We’ve all been through it. The vehicle ahead of us kicks up mud, slush, snow or salt on our windshield and we can’t see a thing.  And not being able to see a thing when we’re driving?  Not a good thing.

Debris on a vehicle’s glass can be blinding when driving directly into the sun.  And other things can ruin visibility: scratches on the glass, fogged windows, mineral deposits. 

So lets make one thing clear:  Your windows.  Here are some tips.

• Number one rule, don’t use abrasives on glass. That means no gritty cleaners that are made for metal.  Avoid at all costs those dark green abrasive pads on some kitchen sponges that are made to clean metal pots and pans UNLESS the manufacturer specifically says they can be used on glass.
• Use the appropriate cleaner for the substance that’s being cleaned off. Special automotive glass cleaners are available, and your Autotronics of St. Peter service advisor can make recommendations.
• Vinegar can work wonders. Sometimes you’ll see hard, grayish water spots on your windows that nothing seems to take off. Distilled white vinegar (available in the grocery store) gets rid of them safely, quickly and easily.
• Use a microfiber cloth designed for cleaning glass; that’s what professional detailers choose.
• Clean the insides of windows, too. That film that develops on the inside of vehicle windows can be the result of plastic interior surfaces decaying in the heat of sunlight (plastic contains oil). The film can also be caused by cigarette smoke. Clean that oily layer off thoroughly.

Now that you have clean windows, here’s how to keep ’em clean.

• Replace your wipers at least once a year. Rubber deteriorates the older it gets, even if you rarely use your wipers.
• You might consider a newer type called a “beam” blade. Most have an aerodynamic design that cleans your windshield better, especially at higher speeds.

Your service advisor at Autotronics of St. Peter will be able to recommend good wiper blades for your vehicle and install them properly.

Visibility.  See what we mean?

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

Just like your skin can burn from too much sun, so can the paint on your vehicle.  It can turn dull, oxidize and fade the more ultraviolet rays beat down on it. One solution is to park in a shady spot, or you can buy a cover for your vehicle and put it on when you know it’s going to be sitting in the sun for awhile. Yes, it takes a couple of minutes to put on, but in the end, keeping the gloss on your paint will help it retain its beauty… and its value.

And it’s not just the sun that can damage your vehicle’s paint.  Grit, bird droppings, sap, dust and dead bugs can all ruin the paint.  So, keep your vehicle clean.  Wash it with a soap made especially for vehicles. Dry it with special towels that won’t scratch your paint.  Remember:  DON’T WASH YOUR VEHICLE IN THE SUN. Once your vehicle is washed, protect the paint even further with a coat of wax.  DON’T WAX YOUR VEHICLE IN THE SUN, EITHER.

Don’t forget the vehicle’s interior.  Plastic components inside can literally disintegrate when sunshine heats them up.  That’s what causes that oily film on the inside of the windows. So, pick up some of those reflective panels that unfold, placing them in the windshield and back window when you know the sun and heat are going to be intense.  They’ll keep out the ultraviolet light and help the interior stay cooler as well.  That will help prevent upholstery from fading and plastic from cracking.

While you’re at it, keep your interior’s interior clean, too.  That dust and dirt can literally bake into the dashboard, the seats, console and carpeting.  There are cleaning products designed to clean your vehicle’s interior that won’t stain it or dry it out.

You invested a lot of money into that vehicle.  The sun and dirt are just waiting to destroy it.  Defend your valuable vehicle against the elements.  Hey, it may not wind up on display in a museum, but it’ll look great and last longer with just a little TLC.   

The last new American vehicles sold in St. Peter with a carburetor rolled out of the MN dealerships in 1990. Since then, all new vehicles here in St. Peter, and nationally, have had fuel injectors. In very simple terms, a fuel injector is a valve that squirts fuel into your engine. Your engine control computer tells the fuel injector how much gas to deliver as well as the precise time it should be delivered. Of course this happens thousands of times a minute. Fuel injectors deliver fuel far more precisely than carburetors. That translates into better fuel economy and more power for St. Peter drivers. Virtually all fuel injectors for gas engines are known as port fuel injectors because they deliver the fuel to a port just outside the cylinder. Port fuel injectors operate at about 40 to 80 pounds per square inch of pressure.

A few vehicle manufacturers have introduced gas direct injection systems on some engines recently. These systems inject the gas directly into the cylinders under very high pressure – hundreds of times the pressure of port injection systems. Although more complicated, direct injection technology promises greater power with improved fuel economy, so MN drivers can expect to see more of it in the future.

As St. Peter residents can see, the level of precision required of fuel injectors is very high. It’s important that they operate properly in order for your vehicle to run right.

High temperatures under your hood and variations in St. Peter gas quality cause fuel injectors to become fouled with wax, dirt and carbon. Injectors can become partially clogged, preventing them from delivering the proper amount of fuel at the correct pressure. The design of each engine requires a specific spray pattern from the fuel injector that might be altered when the injector is dirty. When injectors are dirty, the fuel doesn’t burn as efficiently, resulting in poor fuel economy and loss of power. So it is important to keep your vehicle fuel injectors clean.

Skilled service technicians at Autotronics of St. Peter in St. Peter can perform a fuel system service for you. That is a fuel system service – not just fuel injector cleaning. That is because the fuel has a lot of ways to become dirty or contaminated between the St. Peter gas pump and your fuel injectors. A fuel system service at Autotronics of St. Peter starts with a fuel filter replacement. This filter cleans the gas as it leaves the tank. The various parts of the fuel intake system need to be cleaned from time to time to remove harmful gum deposits and varnish. Finally, the fuel injectors are cleaned so that they operate properly for you and deliver the right amount of fuel at the right time.

Our pros at Autotronics of St. Peter use a process for cleaning your vehicle fuel system that includes state-of-the-art cleaning chemicals as well as some old fashioned scrubbing. Proper maintenance of your fuel system means that you will enjoy strong performance and prevent repairs down the road.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com