Looking at getting some new tires? Maybe the real reason for wanting those off-highway tires is that they look cool. Well there’s nothing wrong with that. If you make sure that you’ve got your functional needs covered with your selection, then you can have some fun with where you go from there.

Let’s suppose you zip around St. Peter in a sporty car. You may like to run a high-performance summer tire when the weather’s good. When MN weather turns cold, you can put on high-performance winter tires. For the kind of driving you like to do, you want full-on performance tires. All-season tires are naturally a compromise that works well for most St. Peter drivers, but since you have a choice, go for dedicated summer and winter tires.

When it’s time for new tires, visit with a knowledgeable Autotronics of St. Peter tire professional. Describe your needs and wants. He’ll come up with some selections for you to discuss. And once you settle on a type of tire, there are options for special needs: like pulling a trailer or carrying heavy loads.

Tires are one of the biggest purchases for St. Peter drivers. With so many choices, you’ll be able to get what’s best for you. Take your time. And don’t worry about what’s in stock. If you want something that isn’t here at Autotronics of St. Peter, we can order it. Chances are you’ll be rolling on your new tires in a couple of days.

Let us know if you have any other questions!

 Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

 

St. Peter drivers have probably noticed that the government mandates a lot of equipment on cars: emission devices and control computers, safety equipment like airbags and crash worthiness requirements. All of this is great for the motoring public in the St. Peter area, but it does add quite a bit to the price of a new car.

Because new cars are more expensive, St. Peter residents are driving their old cars longer. The average car is now over nine years old. 68% of vehicles on the road have more than 75,000 miles/120,000 kilometers. As cars age, their performance drops, they have difficulty idling for long periods and are more sensitive to weather extremes. Fortunately today’s cars are up to the challenge – but they need a little help to keep on going.

Some owner’s manuals don’t outline service requirements and schedules at higher mileage. Of course, that doesn’t mean it doesn’t have to be done. In fact, it’s more important than ever for St. Peter drivers to stay on top of routine auto maintenance for cars with more than 120,000 miles/190,000 kilometers. Just extend regular service intervals out: for instance a service that’s recommended every 24,000 miles/38,000 kilometers should be performed at 24,000 mi/38,000 km; 48,000 mi/77,000 km; 72,000 mi/116,000 km, 96,000 mi/154,000 km; and on and on.

Because of the additional stress older engines experience, the severe service maintenance schedule may be more appropriate than the regular schedule. Watch for leaks – seals and gaskets dry out over time and do not hold the fluids as well as they used to. If you don’t already have one, it is more important than ever to get a good technician, like any one of the automotive professionals on our team at Autotronics of St. Peter. There are some services and replacements that are scheduled after you put some clicks on the odometer, like timing belts, valve train adjustments, suspension, anti-lock brake service, air bags, etc. And unexpected repairs down the road are just par for the course.

Check for unusual sounds, smells or the way your car feels. These could be hints for St. Peter vehicle owners that trouble is brewing. Better to catch it early before it turns into repair. Regular wash and wax will help maintain your car’s appearance. One of the things St. Peter drivers can do to really help a high mileage vehicle is to begin using high mileage formulation fluids. There are special engine oils, coolants, transmission fluids and power steering fluids that are formulated for cars that have higher mileage.

High mileage oil is designed to condition seals and gaskets, reduce wear and avoid premature burn off. Older vehicle engines are dirtier inside – and dirty engines contaminate their oil faster. High mileage oil has special additives that clean the engine, removing sludge deposits over time. The result is less stress on the engine, better fuel economy and excellent wear protection. Come into Autotronics of St. Peter in St. Peter for a checkup.

Studies have even shown that using high mileage fluids early will actually prevent some of the problems of high mileage vehicles. So once you hit around 50,000 mi/80,000 km, consider stepping up to high mileage formulations. The fluids cost a bit more than standard fluids in St. Peter because of the additional additives, but they can be worth their weight in gold in terms of preventing repair costs down the road.

It does cost more for  vehicle owner’s to properly maintain a higher mileage vehicle in St. Peter – but it’s much cheaper than a new car payment!

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

Have you ever had an experience like this in St. Peter, MN? You drive through the one of those automatic car washes. When you get to the end, where the dryer is blowing, your Check Engine light starts flashing!

You fear the worst, but within a block or two, the light stops flashing, but stays on. By the next day, the light is off.

You wonder; “What was going on?” Well, it’s actually a good lesson in how the Check Engine light works.

Your air intake system has a sensor that measures how much air is coming through it. When you went under the high-speed dryer, all that air was blasting past the sensor. Your engine computer was saying, there shouldn’t be that much air when the engine is just idling. Something’s wrong. Whatever’s wrong could cause some serious engine damage.

Warning, warning! It flashes the Check Engine light to alert you to take immediate action.

It stopped flashing because once you were out from under the dryer, the airflow returned to normal. Now the engine control computer says the danger is past, but I’m still concerned, I’ll keep this light on for now.

Then the Check Engine light goes off in a day or two.

The condition never did recur, so the computer says whatever it was, it’s gone now. The danger is past, I’ll turn that light off.

Now a flashing Check Engine light is serious. You need to get it into Autotronics of St. Peter as soon as possible. But if it stops flashing you can wait a few days, so you have time to see if the problem will clear itself or if you need to get it checked. How does the computer know when to clear itself?

Think of it this way. The engine control computer is the brain that can make adjustments to manage the engine. Things like alter the air-to- fuel mix, spark advance and so on. The computer relies on a series of sensors to get the information it needs to make decisions on what to do.

The computer knows what readings are in a normal range for various conditions. Get out of range, and it logs a trouble code and lights up the Check Engine warning.

The computer will then try to make adjustments if it can. If the computer can’t compensate for the problem, the Check Engine light stays on.

The computer logs a trouble code. Some people think the code will tell the technician exactly what’s wrong.

Actually, the code will tell the technician what sensor reading is out of parameters. It can’t really tell him why, because there could be any number of causes.

Let’s say you’re feeling hot. You get your heat sensor out – a thermometer – put it under our tongue and in a minute or two you learn that you have a fever of 104 degrees F (40 degrees C).

You know your symptom – a fever – but you don’t know what’s causing it. Is it the flu, a sinus infection or appendicitis?

You need more information than just that one sensor reading. But it does give you a place to start and narrows down the possible problems.

There are reports on the internet telling you that you can just go down to an auto parts store and get them to read your trouble code or buy a cheap scan tool to do it yourself.

There are two problems with that. First, the computer stores some trouble codes in short term memory and some in permanent memory. Each manufacturer’s computer stores generic trouble codes, but they also store codes that are specific to their brand.

A cheap, generic scan tool, like you can buy online or that the auto parts store uses, doesn’t have the ability to retrieve long-term storage or manufacturer specific codes. Your St. Peter, MN, service center has spent a lot of money on high-end scan tools and software to do a deep retrieval of information from your engine control computer.

The second problem is that once you’ve got the information, do you know what to do with it? For example, a very common trouble code comes up when the reading on the oxygen sensor is out of whack.

So the common solution is for the auto parts store to sell you a new oxygen sensor — which is not cheap — and send you off on your way. Now your oxygen sensor may indeed have been bad and needed replacing. But the error code could have come from any of a dozen of other problems.

How do you know the right solution? Back to the fever analogy, do you need surgery or an aspirin? Leave it to the pros at Autotronics of St. Peter. Give us a call and let us help you resolve your check engine light issue.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com