MN: What Is the Risk of High Oil Change Intervals?

MN residents may have heard that vehicles don’t need their oil changed as often as they used to. That’s true. But it’s not the whole story.

Owing to improved engine technology and higher oil quality, most newer vehicles can go longer between oil changes than their older counterparts.

So what is a good time interval for oil changes? How do MN residents know when to change it? And why do we change it in the first place?

Oil lubricates a vehicle’s engine, which protects it from friction damage. Over time the oil can collect dirt and contaminants that inhibit its performance. But dirty oil isn’t the only problem for MN residents. What you really want to avoid is called oil sludge.

Oil sludge is caused by moisture in the oil and by hot spots in your engine that burn off oil. This sludge is a gooey gel that can clog engine passageways, which can block lubricants from reaching vital engine parts. The result can be engine wear or even engine failure.

Sludge forms rapidly in an engine that is driven under what are termed “severe conditions.” A vehicle’s owner’s manual includes recommendations for oil change intervals under both normal and severe conditions. Severe conditions include towing a trailer, driving in polluted or dusty conditions, hauling heavy loads or using a car top carrier. Also, extremes in climate such as very hot or very cold temperatures constitute severe conditions for vehicles.

Some people may be tempted to overlook the severe conditions preventive maintenance schedule in their ‘s owner’s manual because of the word “severe.” But consider this: the most common form of severe conditions is stop-and-go driving, rush hour commuting or only driving your vehicle on short trips around the area.

When a vehicle only makes trips under four miles/six kilometers, or under 10 miles/16 kilometers in freezing conditions, the engine doesn’t get warm enough for condensation in the oil to evaporate. The result? You get oil sludge build-up. If your driving patterns are the same as any of the conditions that count as severe, you should be changing your oil more frequently under the severe conditions schedule. 

The team at Autotronics of St. Peter in St. Peter can help you understand what type of oil to use in your vehicle and how it can affect your oil change schedule. Some vehicles are filled with synthetic or synthetic-blend oil at the factory. The owner’s manual will recommend that this oil continue to be used in the vehicle, and oil change intervals will be based on this type of oil.

Also, if your vehicle uses conventional oil, but you have some of those severe driving habits we talked about, you can switch to a premium-grade oil to give your vehicle extra protection. The answer to why we change our oil is fairly simple: to protect our engines and make our vehicles last longer and run better. But the answer to how often to change our oil is more complex: it depends on our vehicle, our driving habits, where we live and what kind of oil we use.

When it comes to oil changes, a little information can go a long way to helping people save money and extend the life of their vehicles. Stay safe, and stay on the road.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290

Differential Service at Autotronics of St. Peter

Here at AutoNetTV, we have national viewers, like your neighbors in St. Peter, who write to us with questions or feedback. One common question we’re asked is: “What is a differential and what does it do?” You may have been told by your Autotronics of St. Peter service advisor that your differential needs serviced, or it’s seen it as an option up on the service menu. Differential service at Autotronics of St. Peter covers a lot of things, so let’s first talk about what a differential does.

As you drive through a turn, your outside wheels and inside wheels turn at different speeds. Kind of like the cars going around a race track – the ones driving in the outside lanes have a greater distance to travel than the cars in the inside lanes. The differential is what allows the outside and inside drive wheels to rotate at slightly different speeds so that the tires don’t hop or skip while taking corners, or lose traction in dirt or snow on St. Peter area roads. Differentials have gears in them that transfer the power from the drive train to your wheels – which is why they’re often referred to as gear boxes. The gears need to be very strong to do this work, and they need to be properly protected so that they’ll last.

All vehicles in St. Peter have some form of differential. If you have a front-wheel drive car, your differential is sometimes called a transaxle and is located in the front. If you have rear-wheel drive, the differential is in the back of the car. St. Peter auto owners with a four-wheel drive vehicle have a differential in the front and the back – and in the middle as well. The center differential adjusts for differences in speed between the front and rear wheels.

Differential fluid lubricates and cools the gears. Over time, the fluid can get dirty from bits of the gears grinding off. The additives that keep the fluid clean and protect the differential break down over time. So your vehicle manufacturer has scheduled intervals for you to have your differential fluid changed. Talk to your friendly and knowledgeable Autotronics of St. Peter service advisor if you are not sure about your recommended schedule.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

Fuel System Cleaning at Autotronics of St. Peter in St. Peter for Better Performance

A fuel injector is a valve that delivers fuel to a vehicle’s engine. It has to deliver the precise amount of fuel to precisely the right place, precisely when the engine needs it. The fuel also has to be mixed with air before it can burn in the engine.

Fuel injectors are engineered to spray fuel in a specific pattern into the engine. (The pattern varies by engine type and design.) In order to achieve these spray patterns, the fuel must be pressurized.

The pressure in a fuel injection system varies depending on its type. Many gasoline engines use port injection systems, which operate with a pressure of 60 pounds per square inch. Newer direct injection systems operate at 10 to 30 times that pressure. Some diesel passenger vehicles have fuel injectors that operate at 30,000 pounds or more per square inch.

Vehicles have one fuel injector for each cylinder in the engine. Your vehicle’s control computer constantly monitors the engine and various sensors in the vehicle.  It also adjusts the fuel injectors accordingly so that they can deliver the proper amount of fuel to the engine. As you can see, fuel injectors are a sophisticated and vital part of your vehicle’s engine.

Because fuel injectors are such precision instruments, dirt and contaminants are a serious detriment to their performance. When an injector gets gummed up, it affects the pressure, pattern and timing of the fuel delivery. The result is a decrease in fuel economy and loss of engine performance.

So it’s important to keep your fuel injectors clean. That starts with keeping the fuel in your tank clean. High-quality fuel contains detergents and additives that help clean your engine. Brand-name MN fuel companies also deliver a more consistent quality of fuel than do bargain stations in the St. Peter area.

The second way to keep your injectors clean is to keep your fuel filter clean. This filter screens dirt and rust out of the fuel as it travels from the tank to the engine. If the filter clogs up, fuel will bypass it and carry its load of dirt into the engine.

Check your owner’s manual or ask the pros at Autotronics of St. Peter in St. Peter to find out how often you should change your fuel filter. This should be part of your regular preventive maintenance. Also, remember that if you use bargain-brand or low-grade fuels, or if you drive an older vehicle, your filter will need to be changed more often.

You can also purchase cleaners that will protect your fuel injectors. These cleaners are added to the fuel tank. They work best at preventing build-up in your fuel injectors and can clean up small amounts of carbon, gum and varnish. But they won’t be able to clean a fully gummed-up injector. Read the labels before using any of these products for full directions on their use.

If your fuel injectors are gummed up, you can get a professional deep cleaning service at Autotronics of St. Peter in St. Peter that will result in better fuel economy and improved vehicle performance.

Good vehicle care will prevent serious damage to your fuel injector system. And this is one system that you want to keep in perfect condition.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com