When you feel your vehicle vibrating as you’re driving down the road, one cause could be something you may not have ever seen: your driveshaft.  It is underneath the vehicle and most drivers don’t climb under there to take a look very often.  The driveshaft is a cylindrical part that helps conduct the rotational power from your engine to your drive wheels.  If you have a four-wheel drive vehicle, you may have two driveshafts. 

The drive shaft has bushings, and when they wear out, that’s a likely source of the vibrations.  When the bushings are in good condition, they prevent the driveshaft from vibrating.  And if you don’t get your vehicle repaired fairly soon after discovering vibrations, they’ll continue to get worse and cause other components of the drivetrain to wear out.

The driveshaft is, of course, only one part of the drivetrain.  It includes other parts such as axles, transmission, differentials and joints.  They all work together and need to be maintained properly.  When a driveshaft fails, there can be symptoms other than vibrations.  They include difficulty turning, rattles, clunks and squeaks coming from underneath your vehicle. You may even feel a shudder when you accelerate from a stop.

Driveshafts can fail when they get corroded or damaged by rough roads, curbs and debris. A trained technician with experience working on drivetrains uses specialized equipment that doesn’t further damage the drivetrain’s other parts.  Sometimes the entire driveshaft will have to be replaced; sometimes the problems can be fixed by replacing individual components. 

Your vehicle’s drivetrain was engineered to propel you smoothly down the road.  When time and distance begin to take their toll, have your vehicle looked at by your service facility. They’ll know how to properly pinpoint what’s causing your problems and restore your vehicle to the reliable, smooth, safe machine its designers worked hard to create.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

In the hot weather, seeing steam coming from the engine compartment is something we all dread.  No one wants that to happen to them. But if you know the signs of overheating and how to deal with it, you may be able to reduce the risk of damage to your vehicle, maybe even prevent getting stranded on the road.

Besides the steam coming out of the engine compartment, here are a few signs of overheating.  Your vehicle has a heat gauge that may have a needle that can go into a red zone or up to the “H” (for High) position.  You may smell odors, perhaps a burning (could be hot oil) or a sweet smell (engine coolant leaking). 

When you encounter any of those signs, you know you have to do something to keep the engine as cool as possible to avoid potentially catastrophic damage.  Turn off the air conditioning and turn up the heat.  While that last part may sound odd, it helps draw heat out of the engine. 

If you can do it safely, pull off the road to a spot away from traffic.  Turn off the engine so it can cool down for a few minutes.  You may want to call for help at this point, then switch on the key to “accessory” position to see if the engine has cooled down to the normal range.  You may have to have your car towed to a service facility or, if there’s one nearby, you may be able to slowly drive to it.  But keep your eye on the heat gauge and immediately stop if it starts to overheat again. 

The best hedge against engine overheating is regular maintenance.  When the cooling system and other engine components are working like they should, your chances of an overheated engine are drastically reduced.  Your service facility will keep their eyes open for leaking hoses, cracked belts, rusted pipes and other things so they don’t fail at the most inopportune time.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com