If your windshield wipers are streaking and chattering when you turn them on in the rain or snow, it’s time for a little “blade renewal.” And when it comes to new wiper blades, there are some new designs that are worth a look.

One of the latest is called the beam blade.  It’s different than conventional blades you might be used to.  Instead of a metal frame and a rubber blade that slides in the frame on a track, the beam blades have an enclosed spring-steel band that allows the rubber wiper to conform to the windshield glass shape much more tightly. 

There are some key advantages to beam blades, which is why many vehicle manufacturers are making them standard on their latest models.  For one thing, they work well in all weather conditions, including the heat of summer and the icy, snowy cold of winter.  Since there is no separate frame, snow and ice can’t form in gaps like conventional wipers and prevent the blade from clearing your windshield. 

Many beam blades also have a mini “wing” on them. It uses the air moving over your windshield to create a little extra downward pressure that presses the blade even more tightly against the glass.  The faster you go, the more firmly the blade can sweep off moisture. That means a clearer view. 

Beam blades are an upgrade that can add to your vehicle’s overall safety with that increased visibility.  The best thing is to discuss wiper blades with your service advisor to see if it’s a good choice for you and your vehicle, keeping in mind the type of driving you do and the climate you live in.  Remember that when it comes to wipers, it’s important that you are using blades that are designed to fit your vehicle and that they are installed correctly. 

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

You may have had a friend whose vehicle was the victim of hungry rodents.  After all, mice, rats and squirrels—even rabbits—have been known to gnaw on wires in engine compartments, causing vehicle electrical systems to go haywire.  They can disable a vehicle completely and be very expensive to fix.

In 2017, some drivers noticed their vehicle’s wiring was being chewed and found out the automaker was using a relatively new material for covering their wires: soy.  Many of the repairs to their new vehicles weren’t covered under warranty by the manufacturer when it was discovered rodents were eating the wiring.  So the owners filed a class action suit, saying the soy covering was essentially baiting the critters. 

The automakers tell a different story, saying mice, rats and squirrels have been chewing through wire insulation long before it was made out of soy. 

Regardless of what the insulation is made of, vehicle owners should make sure rodents aren’t chowing down and creating a problem in the engine compartment.  They can have their repair facility check for these signs:  Little bits of acorns, leaves, chewed up plastic and animal droppings in the engine’s nooks and crannies.  Using a black light, your technician can detect animal urine, a sure sign that they’ve been using your engine compartment as a warm apartment, a nest and a dining room. 

You can take steps to prevent rodents from chomping your vehicle’s parts.  Honda—one of the vehicle manufacturers that uses soy-based wiring covering—makes a rodent tape.  It contains a spice called capsaicin that rodents find too hot to handle.  Other preventative measures include installing metal mesh around wiring harnesses or spraying the engine compartment with special rodent-repellants. 

Rodent damage can cost one vehicle owner thousands of dollars to fix, not the kind of bite anyone wants taken out of their bank account. 

If you were to name the most important safety feature on your vehicle right now, what would your answer be? A lot of driving experts would agree that it’s your brakes.  Most newer vehicles use a well-engineered and efficient style of brakes called disc brakes. 

The name disc brakes comes from one of the components: a disc attached to the wheel hub that is squeezed by parts called calipers.  If you’ve ever ridden a bicycle with hand brakes, you probably have seen how they squeeze against the rim of the bike wheel to stop the bike. It’s similar to the way your vehicle’s calipers squeeze against the disc rotor, with added parts called brake pads attached to the calipers that are what create the friction and stop your vehicle.

Here’s why disc brakes need regular maintenance.  Over time, that friction creates wear and tear on the brake pads and the rotors, and you’ll start to see the signs.  Your brakes may have one of the 3 “S” sounds: squeaking, squealing, or scraping. The sound is usually the first sign of brake pad wear which can lead to rotor damage.  Soon you may notice a pulsating or vibration when you brake. That’s because your once smooth and straight rotor disc is warping from the heat generated from friction. Or it may be due to wear.  Eventually, your brakes will take a longer distance to stop your vehicle, and the rotors can have grooves carved into them.

When you start noticing any of these signs, it’s a good idea to have them inspected by a trained technician.  They will measure the rotor thickness, check wear patterns for grooves and heat discoloration, and see how much of the brake pads remain. They will also check to make sure all brake components are moving freely, check your brake fluid, and look for corrosion.

Most vehicle manufacturers require worn or damaged rotors to be replaced, not resurfaced. It’s all part of a complete brake job, replacing pads and the brake hardware parts along with the rotors. It reduces the chance of premature failure.

How often you will need your brakes serviced depends on the manufacturer’s recommendations, your driving habits, and the environment you live in.  Your service facility can recommend the best replacement parts based on those factors. 

Regular maintenance and attention are vital for keeping your brakes performing like they are designed to. Remember, your brakes are your vehicle’s most important safety feature.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com