Breathe Deep in St. Peter With a New Cabin Air Filter

Poor interior air quality is nothing to sneeze at, and St. Peter auto owners might be interested to know that more and more new cars are coming equipped with a cabin air filter. Check your vehicle owner’s manual, but they typically need to be replaced at around 12,000 to 15,000 miles (19,000 to 24,000 kilometers).

The filter is usually under the vehicle hood or under the dashboard. Some are a little tricky to get to, so you’ll want to have your friendly and knowledgeable Autotronics of St. Peter service advisor take care of replacing them.

As we said, many St. Peter people don’t realize they have a cabin air filter and come to Autotronics of St. Peter saying “my vents are smelling bad.” It usually turns out to be a dirty cabin air filter. A switch out and they’re on their way, smelling sweet.

St. Peter residents who suffer from allergies can really benefit from a cabin air filter as it keeps irritants to a minimum. If you’re one of them, you’ll want to replace your filter regularly.

If you do a lot of driving in dusty or polluted St. Peter conditions, you’ll need to change your cabin air filter more often.

Give us a call.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

 

A Hot Mess (AC System-Compresser)

Air conditioning used to be a real luxury in a vehicle, but now it’s standard in most.  Your vehicle’s air conditioning system is built to last a pretty long time, but like anything mechanical, sometimes it fails. 

It helps to know a little about how the A/C works. There’s a compressor that pressurizes the refrigerant (you probably recognize the term Freon).  That makes it hotter, so it then goes through a condenser that cools it off.  Then another component takes out impurities and humidity before the Freon goes to a device that makes it lose pressure before it goes to the evaporator.  That’s where it gets colder and takes the humidity out of the air. Then your vehicle’s ventilation system blows air over the evaporator, cooling the cabin air that gives you such relief on a hot day.

Of all these parts, one that does a lot of work is the compressor.  It has to compress that refrigerant and circulate it through the system.  It turns on and off several times when it’s working. The good news is that if it’s going to fail, it sometimes lets you know. 

One of the signs that your air conditioning compressor is going bad is a noise under the hood when the engine is on, sometimes a squealing or grinding sound. It usually is pretty noticeable. Compressors have a bearing that can seize up after time, causing the belt that drives it to squeal when it’s trying to turn something that won’t turn.  It will sometimes cause that belt to break. 

Your service advisor can tell you if your compressor is repairable or must be replaced.  In the case of a broken belt (often a serpentine belt that drives several components) the belt will have to be replaced as well.

The compressor also has a clutch that turns the compressor on and off so it doesn’t have to run all the time. Sometimes that clutch can fail, too, and your service advisor will often recommend you replace the compressor and the clutch at the same time. Our technicians can help make sure your air conditioning system keeps its cool, and you along with it. 

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com

All Lined Up (Alignment Inspection)

When you head down a straight road, does your vehicle pull to one side?  Do you feel vibration in any of the wheels? If you’ve noticed any of these things, it’s probably time for you to get your wheel alignment checked.

When your vehicle left the factory, its wheels were parallel to each other and perpendicular to the ground.  That maximizes traction for good steering and braking. Every time you take your vehicle on the road, normal wear and tear will affect your alignment. Hit a bump, a pothole or a curb and all those little knocks will add up

Bad alignment not only can cause your steering wheel to pull unevenly, it can also wear your tires out a lot faster than they should. In fact, if you look at your tires and see one side of the tread is a lot smoother than the other, it could be another sign of bad alignment.

Since different problems can cause similar symptoms, the first thing our trained technician will do is test drive your vehicle. Then, they’ll check the front end and steering linkage as well as look for tire wear.  Then, the technician will put your vehicle on a lift and use computerized diagnostic equipment to measure alignment angles so they can precisely align your vehicle’s components.

There are different kinds of alignments.  One is a front-end alignment that aligns components of the vehicle’s front axle.  Another is a thrust alignment that makes sure the front wheels are lined up with the direction the rear wheels are pointed.  A third type is four-wheel alignment which is usually used on all-wheel drive and  4-wheel drive vehicles.  It’s also recommended for front-wheel drive vehicles that have independent rear suspensions.  It makes sure the angles of all the wheels are where they should be relative to each other and also the vehicle’s body or frame.

Your steering wheel should be perfectly centered if you are heading straight down the road, so the technician will adjust it so it is. Finally, they’ll take your vehicle back on the road for a final test drive to make sure it’s performing the way engineers intended.

Your service adviser can recommend how often you should have your alignment inspection, since it depends on the type of vehicle you drive (SUV, sporty car, etc.) and your driving environment.  Properly aligned wheels can help your vehicle perform better and save you from expensive repairs down the road.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290
http://autotronicsstpeter.com