All posts by autotronics

Stop It! You Need Good Brakes

Good brakes are obviously very important. If you’ve ever had your brakes go out while you’re driving around the Cleveland area, you’ll know how terrifying it can be. Today we’ll focus on how to tell when you have a brake problem, and how to make good repair choices.

Often, the first indication that something’s wrong with the brakes is an unusual sound. It could be a squeal, chatter or grinding sound.

Some brake pads have a little piece of metal embedded in them that will make a squeal or chirping sound when the brake pads have been worn down to the point that they need to be replaced. It’s an early warning indicator.

When you hear that sound, schedule an appointment at Autotronics of ST Peter soon.

Now a chattering sound is more urgent. That usually indicates that something is loose. It could be a brake pad or even the brake calipers. If one of those parts falls off, you could have some serious trouble stopping the vehicle. It would be a good idea to park it until you can get into the shop.

A grinding noise usually means that the brake pad is completely worn away and the metal parts of the brake are rubbing directly on the metal brake rotor. That means the rotor is being damaged and will need some work. More on that later.

Another warning sign is that your brake pedal may feel soft and spongy – or it may even feel very hard to push in. Both could mean trouble. And of course, you may get a dashboard brake warning light.

Now when it comes time to replace your brake pads, you have a choice to make. You can get the same pads that came standard on your vehicle. You can expect the same performance and durability as with the pads that came on the car from the factory.

Now you can also get a budget brake pad. Sometimes drivers insist on lower cost pads. That’s OK if the budget demands it, but you need to be aware of the trade offs. Lower grade pads are usually noisier, so you’ll have to live with more noise when you apply the brakes. They also tend to generate a lot more brake dust, you know, that black dust that accumulates on your wheels. And they probably won’t last as long either. In our opinion, that’s a lot of compromise for just a few dollars in savings.

You can also choose to buy premium brakes pads. These perform at higher specifications than the factory pads. You can expect quieter operation, less brake dust and better stopping power.

Now, getting back to the rotors. The rotors are the discs that the brake pads clamp down on to stop the vehicle. If you’ve been driving with completely worn brake pads, you’ve scratched grooves into the rotors. If the grooves aren’t too deep, the rotor can be resurfaced. A thin layer of metal is cut off the surface of the rotor to make it smooth again.

Now, if the grooves are too deep or if the rotor has already be resurfaced before, there may not be enough material to resurface and still have a rotor that’s thick enough to safely stop the vehicle. In that case, the rotor will have to be replaced.

Something that’s often overlooked is the brake fluid. Your manufacturer has a recommended schedule for evacuating the old brake fluid, cleaning the system and refilling it with fresh brake fluid. This is really important to brake performance.

So here’s the bottom line: if you suspect, inspect. If you notice any of these warning signs, have your brakes inspected. Your advisor can help you make the repair decision that’s right for you.

Keeping Your Engine Cool In St. Peter, MN

The cooling system keeps MN car owners’s engines from overheating while they are driving around St. Peter, Saint Peter and Le Sueur. Its job is to move heat away from the engine. Let’s talk about the various components of the system and how they make this happen.

The radiator is the part most St. Peter motorists associate with the cooling system. Coolant flows through the radiator which has fine cooling fins that draw the heat out of the coolant and dissipate it into the air. To make sure there’s enough airflow over the radiator, a fan pulls air over the cooling fins even when the minivan is idling.

In some minivans, the fan is powered by the serpentine belt. On others, an electric motor runs the fan. Electric fans turn on and off as needed. You may have heard the fan kick on shortly after you turn your minivan off. The sensor has determined that the engine needs a little help cooling down to a safe temperature.

St. Peter MN Radiator A hose connects the radiator to the water pump. The water pump pushes the water into the minivan engine block. Now the engine block and cylinder heads have passages for the coolant to pass through without getting into the oil or the combustion chamber. In the automotive community, these passages are referred to as the “water jacket”.

While the coolant is passing through the water jacket, it absorbs heat from the minivan engine on its way to the radiator for cooling. Between the engine and the radiator is a gatekeeper called the thermostat. The thermostat’s job is to regulate the temperature of the engine just like your home thermostat regulates the temperature in your St. Peter house. It gets your engine up to the correct operating temperature and then keeps it from overheating.

When you first start the engine, it’s very cold and needs to warm up. So the thermostat blocks the flow of coolant to the radiator. As the engine warms up, the thermostat starts to let coolant flow through the system.

The final component the team at Autotronics of ST Peter wants to point out is the overflow reservoir. This bottle is designed to hold some of the coolant. It’ll have a mark that indicates whether or not you have enough coolant. This is where you should add coolant if you just need to top it off.

Caution: never open the reservoir or the radiator cap when the car’s hot. The cooling system is pressurized and opening them while it’s hot can cause hot coolant and steam to escape resulting in serious burns.

Cooling system failure is the most common mechanical failure in vehicles around St. Peter, MN. At Autotronics of ST Peter, we can do a periodic inspection of the components for dangerous leaks, loose connections and weakening hoses.

Autotronics of ST Peter
111 Jefferson Avenue
St. Peter, MN 56082
 507.934.9290

Your automobile manufacturer has also specified a cooling system service interval. With a cooling system service at Autotronics of ST Peter in St. Peter, the old coolant is replaced with correct clean fluid that contains the additives required to prevent corrosion. The additives are depleted over time and you need fresh fluid for adequate protection. Your radiator pressure cap should be replaced at this service as well.

Maintaining Your Older Car In St. Peter MN

The government mandates a lot of equipment on cars in St. Peter MN: emission devices and control computers, safety equipment like airbags and crash worthiness requirements. All of this is great for the St. Peter MN motoring public, but it does add quite a bit to the price of a new car.

Because new cars are more expensive, people in the Cleveland area are driving their old cars longer. The average car is now over nine years old. Two thirds of vehicles on the road in Cleveland have more than 75,000 miles. As cars age, their performance drops, they have difficulty idling for long periods and are more sensitive to weather extremes. Fortunately today’s cars are up to the challenge – but they need a little help to keep on goin’.

Give Autotronics of ST Peter a call to schedule your next maintenance.
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290

Some owner’s manuals don’t specify service requirements at higher mileage. That doesn’t mean it doesn’t have to be done. In fact, it’s more important than ever to stay on top of routine maintenance for cars with more than 75,000 miles.

First, just extend regular service intervals out: for instance a service that’s recommended every 15,000 miles should be performed at 15,000, 30,000, 45,000 and 60,000 miles, and so on. Because of the additional stress older engines experience, the severe service maintenance schedule is more appropriate than the regular schedule – ask your service advisor. Watch for leaks – seals and gaskets dry out over time and don’t hold the fluids as well as they used to.

It’s also time to make sure you have a good St. Peter MN technician. There are some services and replacements that are scheduled after you put on some clicks, like timing belts, valve train adjustments, suspension, anti-lock brake service, air bags, etc. And unexpected repairs down the road are just par for the course. Check for unusual sounds, smells or the way your car feels. These could be hints that trouble’s brewing. Better to catch it early before it turns into a costly repair.

And a regular wash and wax will help maintain your car’s appearance. One of the things you can do to really help your high mileage vehicle is to begin using high mileage formulation fluids. There are special engine oils, coolants, and transmission and power steering fluids that are formulated for cars that have a few clicks on the old odometer.

High mileage oil is designed to condition seals and gaskets, reduce wear and avoid premature burn off. Older engines are dirtier inside – and dirty engines contaminate their oil faster. High mileage oil has special additives that clean the engine, removing sludge deposits over time. The result is less stress on the engine, better fuel economy and excellent wear protection.

Studies have even shown that using high mileage fluids early will actually prevent some of the problems of high mileage vehicles. So once you hit around 50,000 miles, consider stepping up to high mileage formulations. High mileage fluids cost a bit more than standard fluids because of the additional additives, but they can be worth their weight in gold in terms of preventing repair costs down the road. It does cost more to properly maintain a higher mileage vehicle – but it’s way cheaper than a new car payment!