Tag Archives: Fluids

The Autotronics of St. Peter Basic Guide To Synthetic Oil

Synthetic motor oil has been around for a long time, and more and more new vehicles are leaving factories with synthetic in their engines. But a lot of drivers don’t really know much about it.

Let’s start with conventional oil – the kind folks are used to. Conventional oil is made up of naturally occurring hydrocarbon chains, which means its molecules are long and have various lengths. Like a pile of pencils, some of them new and some of them used.

Synthetic oil is man-made. Its molecules are more uniform and regular in shape – more similar to marbles than pencils. Some synthetic oil starts with a petroleum base that’s modified and others are entirely synthesized from other materials.

Synthetic motor oil works better in both hot and cold temperatures. It’s more chemically stable so it doesn’t readily evaporate or break down in the high heat produced inside your vehicle engine. This means it resists turning to sludge, which is a real engine killer.

Remember that marbles and pencils thing we were talking about? Well, that makes synthetic oil slipperier than conventional oil which means less friction in your engine. Your vehicle engine runs cooler, wears less and lasts longer. You also get a boost in power and maybe even an improvement in fuel economy.

Synthetic oil also lasts longer so you change it less often – which is great for the environment. With longer oil change intervals, you need an oil filter specifically built for the longer service life of synthetic oil. Talk with your friendly and knowledgeable Autotronics of St. Peter service adviser about synthetic oil and synthetic blends – they might be just what you need to improve engine performance and extend the life of your vehicle.

Give us a call.

Autotronics of St. Peter
111 Jefferson Avenue
St. Peter, MN 56082
507.934.9290

The Right Automotive Fluids for St. Peter Drivers

All those automotive fluids can be confusing for St. Peter drivers. Recent years have brought new grades of engine oil, types of transmission fluid, coolant and brake fluid. The right fluid protects your vehicle and helps it perform at its best. The wrong fluid won’t work as well and could even cause damage.

In addition to new grades of engine oil, many vehicles now leave the factory with synthetic oil. People in St. Peter should always use the grade recommended by their manufacturer.

All coolant, also called antifreeze, used to be green. Now there are several other colors of coolant sold at Autotronics of St. Peter in St. Peter. Each type is designed to protect the cooling system components that are particular to your vehicle. The wrong stuff can void your vehicle cooling system warranty and could even cause engine damage.

Most passenger vehicles on St. Peter roads today use either DOT 3, DOT 4 or DOT 5 brake fluid. Your vehicle power brake system is specifically designed to use ONE of these types – you need the right one. Higher numbers do not necessarily mean a higher, upgraded fluid.

Now, the thing is knowing that your vehicle requires specific grades and types of fluids; using the right fluid is good and using the wrong ones is bad. Once you’ve got that down, it’s easy to remember to check with your friendly and knowledgeable pros at Autotronics of St. Peter or your vehicle owner’s manual to find out which automotive fluids to use.

Give us a call.

Autotronics of St. Peter
507.934.9290
111 Jefferson Avenue
St. Peter, MN 56082
http://autotronicsstpeter.com